当前位置: 首页>人才队伍>研究人员

张建

张建,副研究员

籍贯:湖南益阳     出生年月:1984.10

地址:湖北省武汉市洪山区122号武汉理工大学西院逸夫楼503

Emailzhangjian178@whut.edu.cn

 

教育背景:

2008.09-2013.07 武汉理工大学     硕博连读

2004.09-2008.07 武汉理工大学     本科

 

工作经历:

2019.4-至今     武汉理工大学   副研究员

2018.04-2019.08   国防科工局经济技术发展中心(借调)

2015.07-2015.09   武汉理工大学  

2013.07-2015.06   华中科技大学(武钢研究院)博士后

 

研究方向:

1. 梯度复合材料

2. 异种材料连接

3. 多孔金属及金属基复合材料

 

承担和参与项目情况:

1. JGXM201901JQ03-12019-2024300万元。

2. 国家重点研发计划子课题:液态金属电池关键部位腐蚀与防护,2018-202138.5万元

3. 装备发展教育部联合基金:XXXX金属陶瓷复合材料的研制, 2019-2020, 100万元

4. 校自主创新基金(XZ类):多维复杂梯度结构材料制备技术,2020-2021, 10万元

5. 军工横向:多孔钨材料的制备,2017-20189.6万元

6. 共用技术:XXX复合材料制备,2016-2020282万,主要参与人

 

近年发表论文:

[1]   J Zhang, Y Tian, JW Zhu, Y Sun, GQ Luo, Q Shen, LM Zhang. Microstructure and mechanical properties of HfC reinforced W matrix composites regulated by trace Zr. Int. J. Refract. Met. H, 86 (2020) 15096.

[2] Y Li, GQ Luo, Y Sun, J Zhang*, Q Shen*, LM ZhangMicrostructure and mechanical properties investigation of W-Cu composites prepared from dual-layer coated powders, Appl Surf Sci 516 (2020) 146098

[3] J Zhang, YY Hu, QQ Wei, Y Xiao, PA Chen, GQ Luo, Q Shen. Microstructure and mechanical properties of RexNbMoTaW highentropy alloys prepared by arc melting using metal powders. J Alloy Compd 827 (2020) 154301.

[4]   Q Shen, S Ge, AA Zhao, Y Sun, J Zhang*, DQ Zhou, GQ Luo, LM Zhang. Microstructural evolution and mechanical behavior of porous W reinforced by in-situ W2C. J Alloy Compd 797 (2019) 1106-1114.

[5]   GQ Luo, JY He, ZF Song, J Zhang*, M Rao, JJ Mo, YY Wang, Q Shen, LM Zhang. Influence of Effective Physical Contact Area on Microstructure and Mechanical Properties of Diffusion-Bonded TC4/1060Al Joints. J Mater Eng Perform (2019) 28:1226-1234.

[6]   J Zhang, S Ma, JW Zhu, KJ Kang, GQ Luo, CD Wu, Q Shen, LM Zhang. Microstructure and Compression Strength of W/HfC Composites Synthesized by Plasma Activated Sintering. Met Mater Int (2019) 25:416-424.

[7]   RX Liu, GQ Luo, Y Li, J Zhang*, Q Shen, LM Zhang. Microstructure and thermal properties of diamond/copper composites with Mo2C in-situ nano-coating. Surf Coat Tech 360 (2019) 376-381.

[8]   Y Sun, GQ Luo, J Zhang*, JX Chen, GH Wang, Q Shen, LM Zhang. Microstructure, mechanical properties and reinforcement mechanism of dual-scale TC4 titanium alloy prepared by cryomilling and plasma activated sintering. Mat. Sci. Eng. A 736 (2018) 120-129.

[9]   KJ Kang, R Tu, GQ Luo*, J Zhang*, JW Zhu, Q Shen, LM Zhang. Synergetic effect of Re alloying and SiC addition on strength and toughness of tungsten. J Alloy Compd 767 (2018) 1064-1071.

[10] KJ Kang, R Tu, GQ Luo*, J Zhang*, JW Zhu, Q Shen, LM Zhang. Mechanical, electrical and thermal properties at elevated temperature of W-Si-C multi-phase composite prepared by arc-melting. Int. J. Refract. Met. H, 75 (2018) 101-106.

[11] RX Liu, CD Wu, J Zhang*, GQ Luo, Q Shen, LM Zhang. Microstructure and mechanical behaviors of the ultrafine grained AA7075-B4C composites synthesized via one-step consolidation. J Alloy Compd 748 (2018) 737-744.

[12] Y Sun, GQ Luo, J Zhang*, CD Wu, J Li, Q Shen, LM Zhang. Phase transition, microstructure and mechanical properties of TC4 titanium alloy prepared by plasma activated sintering. J Alloy Compd 741 (2018) 918-926.

[13] Y Li, J Zhang*, GQ Luo, Q Shen, LM Zhang. Densification and properties investigation of W-Cu composites prepared by electroless-plating and activated sintering. Int. J. Refract. Met. H, 71(2018) 255-261.

[14]       JN Hu, GQ Luo, J Zhang*, CD Wu, JL Wu, Q Shen, LM Zhang. Interfacial microstructure and strengthening mechanism in Ti–6Al–4V reinforced Al-7075 alloy. Mater. Sci. Tech. 34 (2018) 199-208.

[15] 饶梅, 罗国强, 张建*, 王传彬, 沈强, 张联盟. 93W/Ni/Mo1接头的等离子活化扩散焊接研究. 稀有金属材料与工程, 47 (2018) 3536-3541.

[16] J Zhang, RX Liu, QQ Wei, GQ Luo, Q Shen, LM Zhang. Effect of Ni interlayer on diffusion bonding of a W alloy and a Ta alloy. Mater Test 59 (2017) 9-13.

[17] CC Zhang, GQ Luo, J Zhang*, Y Dai, Q Shen, LM Zhang. Synthesis and thermal conductivity improvement of W-Cu composites modified with WC interfacial layer. Mater Design 127 (2017) 233-242.

[18] M Rao, LM Zhang, J Zhang*, GQ Luo, Q Shen. Effect of Cu interlayer on joining 93W and Mo1 alloys by plasma activated sintering. Mater. Lett 201 (2017) 89-92.

[19] Q Shen, DQ Zhou, J Zhang*, GQ Luo, LM Zhang. Study on preparation and property of porous tungsten via tape-casting. Int. J. Refract. Met. H, 69 (2017) 27-30.

[20] RZ Zhang, LM Zhang, J Zhang*, GQ Luo, DW Xiao, ZF Song et al. Compressive response of PMMA microcellular foams at low and high strain rates. J. Appl. Polym. Sci 46044 (2017) 1-10.

手机扫一扫

版权所有 材料复合新技术国家重点实验室

通讯地址:湖北省武汉市武昌区洪山珞狮路122号 (中国 武汉 430070)

邮编:430070

电话:027-87884448

E-mail:sklwut@whut.edu.cn