当前位置 :首页 > 研究队伍 > 副教授

钟杰

更新日期:2018-05-10

 

钟杰   副研究员 硕士生导师

 

性别:男     出生年月:1983.10       学位:博士

工作单位:武汉理工大学 复合材料新技术国家重点实验室

联系地址:武汉市洪山区珞狮路122 武汉理工大学西院新材所

Emailjie.zhong@whut.edu.cn

 

教育经历

2007.9—2012.1

中南大学 材料学院

博士

2008.9—2011.4

澳大利亚蒙纳什大学

Monash University) 材料工程系

   中国留学基金委              

    联合培养博士

2005.9—2007.7

中南大学 材料学院

硕士

2001.9—2005.6

中南大学 材料学院

本科

 

工作经历

2016.1—至今

湖北省楚天学子

 

2015.4至今

武汉理工大学 材料复合新技术国家重点实验室

副研究员

2013.1 — 2013.2

澳大利亚蒙纳什大学(Monash University)工学院材料工程系

访问学者

20129 — 2015.4

华中科技大学 武汉光电国家实验室

博士后、讲师

2012.3 — 2012.8

澳大利亚蒙纳什大学(Monash University)工学院材料工程系

研究助理

 

研究领域

1) 第三代无机及有机-无机杂化薄膜太阳能电池;

2) 可印刷良性纳米墨水的合成及其在光电子器件中的应用;

3) 基于溶液前驱体的膜层表界面功能化研究。

 

科研项目

1. 透明导电加热玻璃  福耀集团产学研合作 20  主持

2. 大尺寸半透明钙钛矿薄膜太阳能电池制备 湖北省高技术专项(2016AAA041 100 骨干

3. 基于良性溶剂的钙钛矿太阳能电池制备研究 中央高校基本科研业务专项(182459005 10 主持

4. 钙钛矿薄膜太阳能电池电子传输层优化研究  武汉理工大学自主创新研究基金   新教师科研启动基金  2016IVA089 5主持

5. 良性溶液法制备石墨烯基高导高透多功能复合薄膜  武汉理工大学自主创新研究基金交叉培育研究项目(201603030 主持

6. 肼先驱体法制备硫硒锑吸收层及其光电性能研究 开题 5 主持

7. 低维光电材料与器件湖北省重点实验室 开放课题HLOM151002 1   主持

8. 自稳定水基纳米墨水制备高效铜锌锡硫硒薄膜太阳能电池 国家自然科学基金委 青年科学基金(5140211525 主持

9. 可印刷水性铜锌锡硫纳米墨水及其光伏器件制备研  湖北省自然科学基金 面上项目 2016CFB464 3 主持

10. 铜锌锡硫陶瓷单靶溅射制备薄膜太阳能电池  中央高校基本科研业务费资助 华中科技大学面上项目(CXY12M0085 主持

11. 肼基先驱体合成Sb2(S,Se)3薄膜及其光电性能研究 中国博士后科学基金第54批 面上资助二等(2013M5420155 主持

12. 薄膜太阳能电池  国家自然科学基金委优秀青年基金项目(61322401100 骨干

13. 高效硒化锑薄膜太阳能电池研究 国家自然科学基金委 重大研究计划培养项目(91433105200 骨干

 

 

代表性论文

1. Liu, X.; Bu, T.; Li, J.; He, J.; Li, T.; Zhang, J.; Li, W.; Ku, Z.; Peng, Y.; Huang, F.; Cheng, Y.-B.; Zhong, J.*, Stacking n-type layers: Effective route towards stable, efficient and hysteresis-free planar perovskite solar cells. Nano Energy 2018, 44, 34-42.

2. Li, K.; Xiao, J.; Yu, X.; Li, T.; Xiao, D.; He, J.; Zhou, P.; Zhang, Y.; Li, W.; Ku, Z.; Zhong, J.; Huang, F.; Peng, Y.; Cheng, Y., An efficient, flexible perovskite solar module exceeding 8% prepared with an ultrafast PbI2 deposition rate. Scientific Reports 2018, 8, 442.

3. Bu, T.; Liu, X.; Liu, Z.; Chen, R.; Li, K.; Ku, Z.; Li, W.; Peng, Y.; Huang, F.; Cheng, Y.-b.; Zhong, J.*, Organic/inorganic self-doping controlled crystallization and electronic properties in mixed perovskite solar cells. J. Mater. Chem. A 2018.

4. Zhang, Y.; Wang, J.; Liu, X.; Li, W.; Huang, F.; Peng, Y.; Zhong, J.; Cheng, Y.; Ku, Z., Enhancing the performance and stability of carbon-based perovskite solar cells by the cold isostatic pressing method. RSC Advances 2017, 7 (77), 48958-48961.

5. Xu, Y.; Bu, T.; Li, M.; Qin, T.; Yin, C.; Wang, N.; Li, R.; Zhong, J.; Li, H.; Peng, Y.; Wang, J.; Xie, L.; Huang, W., Non-Conjugated Polymer as an Efficient Dopant-Free Hole-Transporting Material for Perovskite Solar Cells. ChemSusChem 2017, 10 (12), 2578-2584.

6. Xia, Z.; Yu, F.-X.; Lu, S.-C.; Xue, D.-J.; He, Y.-S.; Yang, B.; Wang, C.; Ding, R.-Q.; Zhong, J.; Tang, J., Synthesis and characterization of NaSbS2 thin film for potential photodetector and photovoltaic application. Chinese Chem Lett 2017, 28 (4), 881-887.

7. Wen, M.; Zhong, J.*; Zhao, S.; Bu, T.; Guo, L.; Ku, Z.; Peng, Y.; Huang, F.; Cheng, Y.-B.; Zhang, Q., Robust transparent superamphiphobic coatings on non-fabric flat substrates with inorganic adhesive titania bonded silica. J. Mater. Chem. A 2017, 5 (18), 8352-8359.

8. Huang, F.; Pascoe, A. R.; Wu, W.-Q.; Ku, Z.; Peng, Y.; Zhong, J.; Caruso, R. A.; Cheng, Y.-B., Effect of the Microstructure of the Functional Layers on the Efficiency of Perovskite Solar Cells. Adv Mater 2017, 29 (20), 1601715-n/a.

9. Bu, T.; Liu, X.; Zhou, Y.; Yi, J.; Huang, X.; Luo, L.; Xiao, J.; Ku, Z.; Peng, Y.; Huang, F.*; Cheng, Y.-B.; Zhong, J.*, A novel quadruple-cation absorber for universal hysteresis elimination for high efficiency and stable perovskite solar cells. Energ Environ Sci 2017, 10, 2509 - 2515.

10. Bu, T.; Wen, M.; Zou, H.; Wu, J.; Zhou, P.; Li, W.; Ku, Z.; Peng, Y.; Li, Q.*; Huang, F.; Cheng, Y.-B.; Zhong, J.*, Humidity controlled sol-gel Zr/TiO2 with optimized band alignment for efficient planar perovskite solar cells. Sol Energy 2016, 139, 290-296.

11. Zhang, C.; Zhong, J.*; Tang, J.*, Cu2ZnSn(S,Se)4 thin film solar cells fabricated with benign solvents. Front. Optoelectron. 2015, 8 (3), 252-268.

12. Xia, Z.; Zhong, J.; Leng, M.; Hu, L.; Xue, D.-J.; Yang, B.; Zhou, Y.; Liu, X.; Qin, S.; Cheng, Y.-B.; Tang, J., Generalized Water-Processed Metal Chalcogenide Complexes: Synthesis and Applications. Chem Mater 2015, 27 (23), 8048-8057.

13. Zhou, Y.; Leng, M.; Xia, Z.; Zhong, J.; Song, H.; Liu, X.; Yang, B.; Zhang, J.; Chen, J.; Zhou, K.; Han, J.; Cheng, Y.; Tang, J., Solution-Processed Antimony Selenide Heterojunction Solar Cells. Advanced Energy Materials 2014, 4 (8), 10.1002/aenm.201301846.

14. Zhong, J.; Xia, Z.; Zhang, C.; Li, B.; Liu, X.; Cheng, Y.-B.; Tang, J., One-Pot Synthesis of Self-Stabilized Aqueous Nanoinks for Cu2ZnSn(S,Se)4 Solar Cells. Chem Mater 2014, 26 (11), 3573-3578.

15. Zhong, J.; Xia, Z.; Luo, M.; Zhao, J.; Chen, J.; Wang, L.; Liu, X.; Xue, D.-J.; Cheng, Y.-B.; Song, H.; Tang, J., Sulfurization induced surface constitution and its correlation to the performance of solution-processed Cu2ZnSn(S,Se)4 solar cells. Sci. Rep. 2014, 4.

16. Zhong, J.; Peng, Y.; Zhou, M.; Zhao, J.; Liang, S.; Wang, H.; Cheng, Y.-B., Facile synthesis of nanoporous TiC–SiC–C composites as a novel counter-electrode for dye sensitized solar cells. Micropor Mesopor Mat 2014, 190 (0), 309-315.

17. Yang, B.; Wang, L.; Han, J.; Zhou, Y.; Song, H.; Chen, S.; Zhong, J.; Lv, L.; Niu, D.; Tang, J., CuSbS2 as a Promising Earth-Abundant Photovoltaic Absorber Material: A Combined Theoretical and Experimental Study. Chem Mater 2014, 26 (10), 3135–3143.

18. Leng, M.; Luo, M.; Chen, C.; Qin, S.; Chen, J.; Zhong, J.; Tang, J., Selenization of Sb2Se3 absorber layer: An efficient step to improve device performance of CdS/Sb2Se3 solar cells. Applied Physics Letters 2014, 105 (8), -.

19. He, J.; Qiao, K.; Gao, L.; Song, H.; Hu, L.; Jiang, S.; Zhong, J.; Tang, J., Synergetic Effect of Silver Nanocrystals Applied in PbS Colloidal Quantum Dots for High-Performance Infrared Photodetectors. ACS Photonics 2014, 1 (10), 936-943.

20. Han, J.; Zhou, Y.; Tian, Y.; Huang, Z.; Wang, X.; Zhong, J.; Xia, Z.; Yang, B.; Song, H.; Tang, J., Hydrazine processed Cu2SnS3 thin film and their application for photovoltaic devices. Front. Optoelectron. 2014, 7 (1), 37-45.

21. Zhou, M.; Zhong, J.; Zhao, J.; Rodrigo, D.; Cheng, Y.-B., Microstructures and properties of Si3N4/TiN composites sintered by hot pressing and spark plasma sintering. Mater Res Bull 2013, 48 (5), 1927-1933.

22. Zhong, J.; Zhao, J.; Liang, S.; Tan, X.; Zhou, M.; Zhang, G., Synthesis of spherical (30 nm) and rod-like (200 nm) zirconia co-reinforced mullite nanocomposites. Ceram Int 2013, 39 (4), 4163-4170.

23. Peng, Y.; Zhong, J.; Wang, K.; Xue, B.; Cheng, Y.-B., A printable graphene enhanced composite counter electrode for flexible dye-sensitized solar cells. Nano Energy 2013, 2 (2), 235-240.

24. Zhong, J.; Liang, S.; Zhao, J.; Wu, W. D.; Liu, W.; Wang, H.; Chen, X. D.; Cheng, Y.-B., Formation of novel mesoporous TiC microspheres through a sol–gel and carbothermal reduction process. Journal of the European Ceramic Society 2012, 32 (12), 3407-3414.

25. Zhong, J.; Liang, S.; Xu, C.; Wang, H.; Cheng, Y.-B., Meso/micro-porosity and phase separation in TiO2/SiO2/C nanocomposites. Micropor Mesopor Mat 2012, 150 (1), 25-31.

26. Zhong, J.; Liang, S.; Wang, K.; Wang, H.; Williams, T.; Huang, H.; Cheng, Y.-B., Synthesis of mesoporous carbon-bonded TiC/SiC composites by direct carbothermal reduction of sol-gel derived monolithic precursor. J Am Ceram Soc 2011, 94 (11), 4025-4031.

27. Liang, S. Q.; Zhong, J.; Zhang, G. W.; Tan, X. P., Nano-Zirconia/Mullite Composite Ceramics Prepared by In-situ Controlled Crystallization from the Si-Al-Zr-O Amorphous Bulk. Ceramic Materials and Components for Energy and Environmental Applications 2010, 210, 99-108.

28. Liang, S. Q.; Zhong, J.; Tan, X. P.; Tang, Y.; Zhang, Y.; Pan, A. Q., Preparation of Nano-Composite ZTM Ceramics of High Mechanical Properties by In-Situ Crystallization of Amorphous Bodies. Rare Metal Materials and Engineering 2008, 37, 10-13.

29. Liang, S. Q.; Zhong, J.; Tan, X. P.; Tang, Y., Mechanical properties and structure of zirconia-mullite ceramics prepared by in-situ controlled crystallization of Si-Al-Zr-O amorphous bulk. T Nonferr Metal Soc 2008, 18 (4), 799-803.

30. Tan, X. P.; Liang, S. Q.; Zhang, Y.; Zhong, J., Effects of Heat-Treatment Temperature on Structure and Mechanical Properties of ZrO2-Mullite Nano-Composite Ceramics Fabricated by in-situ Crystallization. Rare Metal Materials and Engineering 2010, 39 (6), 1094-1098.

31. Liang, S.; Tang, Y.; Zhang, Y.; Zhong, J., The rheologyical effect of carbon nanotubes on the iron based metal powder injection molding feedstock. Advanced Materials Research 2009, 79-82 (Copyright 2010, The Institution of Engineering and Technology), 469-72.

32. Tan, X. P.; Liang, S. Q.; Zhang, Y.; Tang, Y.; Zhong, J., Crystallization behaviour of the Si-Al-Zr-O amorphous bulk. J. Inorg. Mater. 2007, 22 (6), 1233-1238.

33. Liang, S. Q.; Jia, C. Y.; Tang, Y.; Zhang, Y.; Zhong, J.; Pan, A. Q., Mechanical and electrical properties of carbon nanotube reinforced epoxide resin composites. T Nonferr Metal Soc 2007, 17, S675-S679.